Dry Sterilizer (Laboratory use) (SI401)

Dry Sterilizer (Laboratory use) (SI401)
Dry Sterilizer (Laboratory use) (SI401)
Dry Sterilizer (Laboratory use) (SI401)

Dry Sterilizer (Laboratory use) (SI401)

Dry Sterilizer (Laboratory use) (SI601)Steam Sterilizer (Laboratory Use) (ST511)
Category:
  Contact Us

Description

Natural convection hot air sterilizer withprogram function, easy to set

Features of Dry Sterilizer (Laboratory use) (SI401)

Features
Quick, safe and reliable sterilization function.
Features
Easy operation, available for fixed temp., program, quick auto stop,
auto stop and auto start operations.
Features
Use special function menu keys and up/down keys to realize digital
setting. with repeat function, 3 segments 30 steps program
controller.
Features
Use submenu keys to operate overheat protector, deviation
correction and key locking.
Safety
Self-diagnosis circuit (abnormal temp. sensing, heater
disconnection, auto overheat prevention, SSR short circuit),
overheat protector, ELB to prevent overcurrent, key lock, etc.

Additional information

Model

SI401
Timer

1min-99 hr 59 min and 100 hr-999 hr 50 min (Attached with timing wait function)
Weight

42kg
Circulation method

Natural convection
Operating temp. range

Room temp. +5~260°C
Temp. adjustment accuracy

2°C (at 260°C)
Temp. distribution accuracy

20°C (at 260°C)
Max. temp. reaching time

Approx. 70min.
Interior / Exterior

Stainless steel plate / Cold rolled steel plate with chemical proofing coating
Insulating material

Glass fiber
Heater

Nichrome heating wire / 1.2kW
Air exhaust port

I.D. 30mm×2 (top)
Temp. control

PID control
Temp. setting

Use special function menu key and up/down key to set
Temp. Display

Measured temp. display: Green 4-digit LED digital display,Setting temp. display: Red 4-digit LED digital display
Item Code

292227
Program mode

Program operation 3 segments 30 steps (30 steps×1, 15 steps×2, 10 steps×3)
Operation function

Fixed temp. operation, Auto start, Quick auto stop, Program operation
Additional function

Deviation correction, Key lock, Power outage compensation
Sensor

K thermocouple (Temp. controller and overheat protector)
Safety device

Self-diagnosis circuit (Abnormal temp. sensing, Heater disconnection, Auto overheat prevention, SSR short circuit),
Shelf plate with standard load

Approx. 15 kg/pc.
Shelf support step number / pitch

10 steps / 30mm
Shelf plate material

Stainless punching metal
Shelf plate / bracket

2pcs./4pcs.
Optional

Stand/ONS61C ,Stacking clamp/ODK82C, Others/ Shelf plate (1 plate with 2 rests), Recorder, Indicator lamp (Stand-by/Running/Malfunction), External communication (RS485),
Internal dimensions（W×D×H mm）

450×430×400mm
External dimensions（W×D×H mm）

550×540×777mm
Remarks(dimensions)

Internal capacity 77L
Power Source

AC115/220V
Single phase

Related products