Spray Dryer (ADL311-A)

Description

Easily micronize liquid samples with a spray dryer

Features of Spray Dryer (ADL311-A)

ADL311-A: For aqueous soluble samples
Features: Easy setup, easy operation
Features: Suitable for heat sensitive samples. High heat is not
directly applied to dry, fine powder
Features: Obtain contaminant free fine powder which is not
oxidized and contains minimal moisture
Features: Direct drying of solution or solution liquid into fine
powder. No pre- or post processes such as filtration,
separation, or pulverization required
Features: Easy operation with one-touch detachable mechanism
for drying chamber and cyclone
Features: Unique peristaltic pump, nozzle cooling mechanism,
pulse jet mechanism and a nozzle knocker for stable
spray drying

Model	ADL311-A
Heater	2.0 kW (at 200V) to 2.88 kW (at 240V)
Weight	80kg
Temp. adjusting unit setting range	40 to 220deg.C (inlet temperature), 0 to 60deg.C (outlet temperature)
Temperature adjusting accuracy	Inlet temperature±1deg.C
Drying air amount adjusting range	0〜0.7m3/min
Spray air pressure adjusting range	0〜0.3MPa
Liquid sending pump flow rate range	0〜26 ml/min
Spray air line washing function	Spraying at the nozzle tip, manual pulse jet system
External output	Inlet temperature, outlet temperature, temperature outlet (4-20 mA)
Temperature adjusting device	PID digital temperature adjusting device
Touch panel	Blower, heater, liquid sending pump, pulse jet switch, error display
Control select switch	Inlet temperature, outlet temperature control switch (Outlet temp. control is conditional.)
Temperature sensor	K-thermocouple
Item Code	212737
Spraying air pump	Spraying air compressor (sold separately) is used
Liquid sending	Fixed amount peristaltic pump
Service outlet	For stirrer: AC100V, MAX2A
Suction blower	Bypass blower
Filter	Suction filter, exhaust filter
Recovery of solvent	–
Spray nozzle cooling mechanism	Connector: nipple x 2, O.D.:φ10.5 mm
Spray air connection diameter	Nipple diameter:φ7 mm
Spray air pressure	Bourdon tube: 0.3 MPa
Exhaust connecting diameter	φ50mm
Safety function	Inlet/outlet temperature overheat, sample feed reverse rotation mechanism, over current electric leakage breaker, nozzle connection error
External dimensions（W×D×H mm）	580×420×1125mm
Power Source	AC220V Single phase