Spray Dryer (ADL311S-A)

Spray Dryer (ADL311S-A)

Spray Dryer (ADL311S-A)

Spray Dryer Pulvis Mini Spray (GB210-A)Spray Dryer (ADL311-A)
Category:
Download Brochure

Description

Easily micronize liquid samples with a spray dryer

Features of Spray Dryer (ADL311S-A)

ADL311SA: For aqueous soluble samples
(When organic solvent is used, a GAS410 organic
solvent recovery unit is required.)
Features
Easy setup, easy operation
Features
Suitable for heat sensitive samples. High heat is not
directly applied to dry, fine powder
Features
Obtain contaminant free fine powder which is not
oxidized and contains minimal moisture
Features
Direct drying of solution or solution liquid into fine
powder. No pre- or post processes such as filtration,
separation, or pulverization required
Features
Safe and explosion free working is guaranteed in
combination with GAS410 due to oxygen & pressure
control
Features
Organic solvents are recovered in a closed loop to
protect the environment to enable minimized pollution
Features
Easy operation with one-touch detachable mechanism
for drying chamber and cyclone
Features
An arm jack is equipped as standard for easy installation
and removal of glassware attachments
Features
A service outlet (max.2A) and a sample stand are
equipped as standard for connecting a magnetic
mixer for stirring suspended liquid samples
Features
Unique peristaltic pump, nozzle cooling mechanism,
pulse jet mechanism and a nozzle knocker for stable
spray drying
Features
ADL311SA is highly mobile on wheels, or usable
with shorter height as a bench top unit by removing
the movable caster

Additional information

Model

ADL311S-A
Item Code

212738
Accessories

Silicon tubes (with a stopper)×3, Exhaust duct (with one hose band)×1, Outlet temperature sensor, Spray air tube, Sample box, Static electricity removal earth, "Tetron" braided tube hose 5m (with two hose bands)
Temp. adjusting unit setting range

40 to 220°C (inlet temperature), 0 to 60°C (Outlet temperature)
Temperature adjusting accuracy

Inlet temperature±1°C
Drying air amount adjusting range

0 to 0.7m3/min
Spray air pressure adjusting range

0 to 0.3MPa
Liquid sending pump flow rate range

0 to 26 mL/min
Spray air line washing function

Spraying at the nozzle tip, Manual pulse jet system
External output

Inlet temperature, Outlet temperature, Temperature outlet (4-20 mA)
Temperature adjusting device

PID digital temperature adjusting device
Touch panel

Blower, Heater, Liquid sending pump, Pulse jet switch, error display
Control select switch

Inlet temperature, Outlet temperature control switch(Outlet temperature control is conditional)
Temperature sensor

K-thermocouple
Heater

2.0kW (at200V) to 2.88kW (at240V)
Liquid sending

Fixed amount peristaltic pump
Spraying air pump

For water soluble samples air compressor is used (sold separately). For organic solvent samples the integrated compressor in GAS410 is used (No separate air compressor required).
Service outlet

For stirrer: AC100V, MAX. 2A
Suction blower

Bypass blower
Filter

Suction filter, Exhaust filter
Recovery of solvent

Solvent recovery unit GAS410 (Sold separately) is used
Spray nozzle cooling mechanism

Connector: nipple×2, O.D.: ø10.5mm
Spray air connection diameter

Nipple diameter: ø7mm
Spray air pressure

Bourdon tube: 0.3 MPa
Exhaust connecting diameter

ø50mm
Safety function

Inlet / Outlet temperature overheat, Sample feed reverse rotation mechanism, Over current electric leakage breaker, Nozzle connection error
External dimensions（W×D×H mm）

580×420×1125mm
Power Source

AC200-AC240V 16-18A
Single phase
Weight

80kg

Related products